Samsung SSD XP941 Review: The PCIe Era Is Here
by Kristian Vättö on May 15, 2014 12:00 PM ESTFinal Words
I don't think there is any other way to say this other than to state that the XP941 is without a doubt the fastest consumer SSD in the market. It set records in almost all of our benchmarks and beat SATA 6Gbps drives by a substantial margin. It's not only faster than the SATA 6Gbps drives but it surpasses all other PCIe drives we have tested in the past, including OCZ's Z-Drive R4 with eight controllers in RAID 0. Given that we are dealing with a single PCIe 2.0 x4 controller, that is just awesome.
The only major problem in the XP941 is that it doesn't support booting in most Windows systems. If you are a Mac Pro owner, this issue doesn't concern you but for everyone else it's definitely a major drawback. Using an SSD as a secondary drive can make sense for e.g. a video professional where the performance can be utilized as a scratch disk, but otherwise the only real use case for an SSD is as a boot drive. There is hope that 9-series motherboards will bring better support for native PCIe booting but that remains to be seen.
The lack of proper TRIM support is also a minor concern but I'm willing to overlook that because the performance is just so great. I would also like to see hardware encryption support (TCG Opal 2.0 & IEEE-1667) and power loss protection but I understand that for an OEM product, these aren't necessary. Hopefully there will be retail versions of XP941 that address these items.
120/128GB | 240/256GB | 480/512GB | |
Samsung SSD XP941 | ~$229 | ~$310 | ~$569 |
Plextor M6e | $180 | $300 | - |
OCZ RevoDrive 350 | - | $530 | $830 |
Note that the XP941 prices in the table above do not include the adapter or shipping. The adapter comes in at around $25 and RamCity charges $29 for shipping overseas, so you are looking at about $55 in addition to the drive itself. However, you don't have to pay the 10% Goods and Services Tax (GST) when purchasing from overseas and I've already subtracted the GST from the listed prices in the table above. To summarize, the total cost with the adapter and shipping included ends up being about $283 for 128GB, $364 for 256GB and $623 for 512GB. In the end the exact pricing depends on the AUD to USD ratio and banks may also charge a bit if paying with foreign currencies.
In terms of pricing, the XP941 is a steal compared to the competition. The M6e is cheaper but it's also only PCIe 2.0 x2 design and can't offer the same level of performance as the XP941 can. Of course, ultimately two or three SATA 6Gbps SSDs in RAID 0 would be the cheapest route but with RAID 0 you run into other issues (such as increased risk of disk failure). For the average user, I'd still recommend a drive like Samsung SSD 840 EVO or Crucial M500/M550 but I can certainly see the enthusiast and professional crowd paying the premium for the XP941.
All in all, I can't wait for Samsung to release a retail version of the XP941. Right now the only problems are the limited availability and lack of boot support but once these are sorted out, the XP941 will be the king of the market. I'm guessing that we'll probably see something from Samsung at this year's Global SSD Summit, or at least I deeply hope so. We'd also like to see more competition from other SSD manufacturers, but until SandForce's SF3700 is ready to hit the market in the second half of 2014, there isn't a drive that can challenge the XP941.
110 Comments
View All Comments
bharatwd - Thursday, May 15, 2014 - link
Hope something with these speeds comes in sata express.........however im gonna pick one of these as soon as it becomes available....im planning to buy z97 anyways :)mikeangs2004 - Thursday, May 15, 2014 - link
sata is being replaced by m.2. You're outdatedGalatian - Thursday, May 15, 2014 - link
No, you are...he is talking about SATA Express...M.2 is essentially the small form factor connector of SATA Express.Babar Javied - Thursday, May 15, 2014 - link
So use SATA Express when the M.2 is just as good? Also, you don't have to worry about the ugly SATA Express.I am still a little unclear on how SATA express works exactly but from what I understand is that SATA Express requires two PCIe lanes and only operates at x2 speeds whereas this can use the x4 lane. Plus, the M.2 form factor is much smaller than 2.5" used by SATA SSDs. Not that there isn't enough room in a desktop/laptop for a 2.5" drive but if there is no difference in performance why not get the physically small drive?
Again, i could be wrong about the lane speeds so please correct me if I am.
thanks
basroil - Thursday, May 15, 2014 - link
M.2 is a form factor and connector specification, it supports SATA Express, like in this caseSirKnobsworth - Thursday, May 15, 2014 - link
Not quite - SATA express defines an interface for PCIe x2 and 2 SATA ports to share the same pins one one connector. This particular flavor of M.2 just happens to implement PCIe x2 and SATA, but on separate pins.basroil - Friday, May 16, 2014 - link
Meant to say SATA Express supports M.2 rather than the other way around. And it's not just PCIe x2, the M.2 format currently supports up to x4, but the intel chipset and SATA 3.2 don't support above x2 just yet. In M.2, SATA is B and M keys, while PCIe is A B E and M (x4 ) keys, so SATA and PCIe do share some pins (but like you said, not in all cases)Galatian - Friday, May 16, 2014 - link
I don't really think it has anything to do with the Intel chipset. The mainboard manufactures are free to allocate the FlexIO how they like. They can use up to 8 x PCIe lanes, but of course have to reduce the SATA and/or USB ports then. Also the PCIe lanes are used for other things as well like the Intel Gigabit Ethernet port I think.Still I think for a top of the line mainboard it makes more sense to go for the x4 implementation and have a few SATA ports less.
basroil - Friday, May 16, 2014 - link
"I don't really think it has anything to do with the Intel chipset."The chipset does currently support only 2 lanes since the 3.2 specification is meant for 2 lanes, and Intel RST only supports 2 lanes. ASRock bypassed the chipset in it's 4 lane implementation, so it has nothing to do with flex IO (which is the chipset allowing more USB3.0 or SATA, or other things).
SirKnobsworth - Friday, May 16, 2014 - link
Right - x4 from the chipset would probably work just fine but you couldn't use it as a cache.